Can I make a wind turbine using a gas generator?
Tuesday, May 4th, 2010 at
2:02 pm
You are currently browsing comments. If you would like to return to the full story, you can read the full entry here: “Can I make a wind turbine using a gas generator?”.
Filed under: Whole House Generator
Like this post? Subscribe to my RSS feed and get loads more!
a WIND turbine using a GAS generator?
Is this some kind of joke?
How can I eat soup with a spoon while using only a fork?
A wind turbine is powered by the wind
A gas generator is NOT the wind, is it?
References :
Windmill generators are specialized to generate power at low RPM to take advantage of even the least amount of wind.
Gas generators are usually designed to generate power at a specific RPM, and the engine runs at that exact speed, so it may not be very useful for wind power.
Don’t let that discourage you from using wind-power though.
References :
http://www.articlesbase.com/interior-design-articles/windmill-generators-best-choice-549962.html
I have idea. Run extension cord to neighbors house. Plug in leaf blower. Point leaf blower at your windmill. It will save you money.
References :
theoretically you could, but the wind turbine should be at least 30 feet in diameter to generate enough power for your house. this could be a little noisy for your neighbors.
consult an electrician and try, good discoveries always originated from experimentation.
good luck!
References :
Mr Tippy is right about the speed issue but you can overcome this by getting an inverter. Most wind turbines run at variable speeds so they use an inverter to convert the "wild ac" current to a usable form normally 240 volt for home systems. These inverters come in many different sizes to match your generator and can be purchased from many of the online green energy supply places. Sunny boy is a popular brand.
You will also need to figure out how big the blades need to be for your size generator. My wind turbine is 20kw and has a 31 foot diameter blade span. This is huge for a home system and I often get a check from the power company. So you will probably need to research the proper blade size.
One concern that I would have is the bearings in the generator, are they heavy enough to handle the weight and stress of the blades.
References :
using a gas generator, impossible, but if you considered making your own wind turbine there is an answer for you:
http://nutshellurl.com/3ik
Its affordable, and it cuts down on greenhouse emissions.
References :
If only there was a reliable bunch of videos to watch to build my own Wind turbine, I am 100% certain that it would lessen our electricity monthly bill. I think wind turbines and other forms of energy is not far away.
Of course you can do it. It may require an indirect connection with gear reduction etc… Put up the largest dia. windmill you can and transmit power from it mechanically to turn your generator at the proper speed (preferably governed mechanically to avoid over speed/under speed). There are of course better less complicated, less involved options. Almost certainly not your best option though.
not only need an inverer but also the use of gear reduction to increase applied torque or reduce drag otherwise under working loads it will stall out